concrete column forms,Column Formwork Suppliers,concrete forms sale,adjustable column clamp,circular column formwork,Sikanja shuttering clamp,Concrete wall mould,Form board,Beton forme

Contact us

Square Circle Formwork
Tel: +86-539-7758032
Fax: +86-539-7758032
Email: info@scformwork.com

NewsLocation:Home > News

The fastest way to install adjustable column clamp

发布时间:2020/6/18 16:29:11

The fastest way to install adjustable column clamp

1. Butt the four square pillar formworks at once (note the matching of the slot interface during the docking process), and use the square pillar auxiliary bracket to connect the formwork once (make sure that the auxiliary bracket is in the same plane to ensure the level of the square buckle in the next step) . Connect the 4 square pillar formworks in sequence.

column formwork clamp

2. Pass the ends of the four square buckles in turn through the bending space at the head end of the adjacent square buckle, while ensuring that the bending space at the head end of each square buckle catches the tail end of the other square buckle. Then place it on the auxiliary bracket. The inner edge of the square buckle is close to the outer edge of the square pillar formwork.

3. Place the reinforced inclined irons in sequence, and then use a hammer to strike and reinforce the inclined irons in sequence (do not use too much force) to ensure that the reinforcement of each single square circle button is evenly stressed. Measure the distance between the square buckles and start the next round of buckle reinforcement in the above order.

4. Product maintenance and storage: plastic film square pillar formwork, the inner surface layer should be thoroughly cleaned after use, do not use sharp tools during the cleaning process, so as not to damage the plastic film on the surface of the formwork, if it is stored for a long time, it can be coated on the surface of the formwork Oil agent to protect. The wooden square pillar formwork should be protected from sunlight and rain during storage. At the construction site, the formwork should be stored on a flat and dry site with no less than three 10*10 wooden supports at the bottom.


上一篇:concrete wall mould

下一篇:China University exam begins today

RELATED PRODUCTS